EdgeIX – Melbourne
Find colocation with peering access to EdgeIX – Melbourne in Melbourne. Compare 5 connected data centers below, join 74 member networks already peering at this exchange, and request free quotes for colocation + IX port from any facility on this page.
Facilities reaching EdgeIX – Melbourne (5)
Why Peer at EdgeIX – Melbourne?
EdgeIX – Melbourne is an active peering point in Melbourne, AU. With approximately 74 member networks peering on its fabric, joining cuts transit costs by routing traffic directly to other members instead of through upstream IP transit providers. Operators colocated at any of the 5 connected data centers can purchase a cross-connect to EdgeIX – Melbourne's shared switching fabric and start peering bilaterally or via route servers.
Typical reasons network operators peer at EdgeIX – Melbourne:
- Lower transit costs — peer with major content providers and eyeball networks directly
- Reduced latency — bypass upstream transit for traffic destined to other IX members
- Better redundancy — multi-homed BGP via the IX fabric plus your transit providers
- Cloud on-ramps — many IXes co-located with AWS / Azure / GCP direct connect points
Peering Services & Cross-Connects at EdgeIX – Melbourne
Most colocation operators at the facilities below offer direct cross-connects to the EdgeIX – Melbourne shared fabric. When you request a free quote for colocation at any of those facilities, specify the peering services you need so operators can confirm pricing for both the cabinet and the IX port.
IX Ports & Capacity
- Port speeds — 1 GbE, 10 GbE, 100 GbE, 400 GbE for the largest members
- LACP aggregation — bond multiple ports for higher capacity
- Quarantine VLAN — pre-production isolation before going live
- Port redundancy — connect from two cabinets / switches for resilience
- Membership tiers vary by IX (member vs. customer vs. reseller)
BGP & Peering
- Bilateral peering — direct BGP sessions with chosen members
- Route server peering — multi-lateral sessions with most members in one BGP turn-up
- RPKI / ROA filtering increasingly required by route server operators
- BYO ASN — bring your own AS number; multi-homed deployments standard
- IPv4 + IPv6 dual-stack peering across both fabrics
Cross-Connect to Fabric
- Carrier-neutral cross-connect from your cabinet to the IX edge port
- SMF (single-mode fiber) for 10G+ connections
- Cross-facility — extension via dark fiber to EdgeIX – Melbourne if your cabinet is at a remote site
- One-time install + monthly recurring billing typical
- Latency to fabric typically under 1 ms within a meet-me room
Cloud On-Ramps & Transit
- AWS Direct Connect, Azure ExpressRoute, Google Cloud Interconnect — many co-locate with major IXes
- IP transit blends alongside peering for non-member destinations
- DDoS mitigation — at-fabric or at-cabinet options
- Looking glass access for path diagnostics
- Route optimization tools and BGP analytics integrations
Request Free Quotes for EdgeIX – Melbourne Colocation + Peering →
Free Quotes for EdgeIX – Melbourne Colocation + Peering
Total cost-to-peer at EdgeIX – Melbourne typically combines several line items: colocation space and power, cross-connect to the IX fabric, and the IX membership/port fee itself. ColoMap connects you directly with colocation operators for free, no-obligation quotes — most respond within 1–2 business days.
Common quote requests include:
- Quarter / half / full cabinet with 2-5 kW redundant power
- Cross-connect to EdgeIX – Melbourne fabric (specify 1G or 10G+ port)
- IP transit alongside peering for non-member destinations
- Remote hands for router turn-up and ongoing BGP changes
Request Free Quotes → No signup, no obligation.
Frequently Asked Questions — EdgeIX – Melbourne
How do I peer at EdgeIX – Melbourne?
To peer at EdgeIX – Melbourne, you need three things: (1) a cabinet at one of the connected colocation facilities listed on this page, (2) a cross-connect from your cabinet to the IX edge port in the meet-me room, (3) an IX membership and BGP turn-up. Use the free quote request to source all three at once — most colocation operators handle the cross-connect and can coordinate the IX membership process.
Which colocation facilities can I peer at EdgeIX – Melbourne from?
5 colocation facilities offer direct cross-connect access to the EdgeIX – Melbourne fabric. Browse the full list above, then request a free quote from any facility you're interested in.
How many networks peer at EdgeIX – Melbourne?
Approximately 74 networks are members of EdgeIX – Melbourne. Larger membership generally means broader peering reach and lower transit costs for high-volume operators.
What port speeds are available at EdgeIX – Melbourne?
Most large IXes offer port speeds from 1 GbE up to 400 GbE, with LACP port aggregation for additional capacity. Pricing varies by speed and tier. Specify your expected traffic levels in your free quote so operators can recommend the right port.
Are the EdgeIX – Melbourne colocation quotes really free?
Yes — every quote on ColoMap is free and no-obligation. We route your request to the facility's sales team and you receive pricing directly from the provider, including any IX-specific options. No signup or credit card required.
How fast will I get pricing for EdgeIX – Melbourne colocation?
Most operators respond within 1–2 business days. Mention your timeline in the quote request and operators will prioritize urgent deployments.
Get Free Quotes for EdgeIX – Melbourne Colocation
Tell us your requirements — cabinet size, power, IX port speed, peering scope — and we'll route your request to colocation facilities offering direct EdgeIX – Melbourne access. Free, no-obligation, with most operators responding in 1–2 business days. No signup or credit card required.